Improve Pressroom Efficiencies – Part 2 Last week, we kicked off our 3-part “Beyond the Densitometer” blog series looking at “Good”, “Better”, and “Best” upgrade options for packaging printers to reduce their make-readies, improve their color matching process, and attain more consistent color throughout their pressruns. In part 1, we examined the benefits of switching from densitometers to handheld spectrophotometers in flexographic pressrooms. As discussed, this is a relatively easy upgrade because these instruments still measure…

Beyond the Handheld Densitometer – Part I While handheld densitometers have already been adopted in many flexographic pressrooms, it’s important to remember that these devices do not actually measure color and are therefore incapable of reporting the accuracy of brand or spot colors on press.  The best that desitometers can do is to measure and report the densities (ink film thickness) of solid color patches and the tone value increase (TVI) of halftone dot areas. …

“It’s Easier Than You Think!” Is your closed-loop color control system showing it’s age or require expensive repairs? Any chance it was made by that “X” company? Upgrading to a new Techkon SpectroDrive can improve your productivity enough to cover the cost. Find out why KBA, Heidelberg, Manroland, Komori, RMGT, Sakurai, Goss, Akiyama and more are retrofitting their presses with Techkon press-side color measurement solutions. After reading about the advantages for sheet-fed offset presses, use…

When printing colors other than CMYK, many users understandably turn to colorimetric information (CIE LAB, Delta-E). Frequently overlooked, however, is the importance of using optimized density metrics for process control in the offset lithographic pressroom.  One such metric, available on many spectrodensitometers, is spectral density (sometimes called “density-by-wavelength” or “lambda density”, or simply “color density”). A brief illustration of how a densitometer “sees” color ensues, followed by an overview of spectral density. Consider looking at…

Automated Color Control for Offset Printing Environments  While color measurements can be taken by hand, calculated, and worked out to verify a ‘passing’ sheet, for most offset printers this is not practical. The time it takes, both to measure and to calculate all the required print attributes, is prohibitive. When printers ask about doing this, we advise that while it can be done, for most printers they will not be successful. Many brand customers care…

Color Quality for Brand Owners We invited Sonja Dearden, Print Production Manager at Lindt Chocolate, to a discussion on color quality for brand owners and developed this Question & Answer Guide to provide valuable insights on the importance of print standardization when managing color around the globe. QUESTION: Why do we need print standardization? ANSWER: An international company can have many different designers, pre-press agencies and print vendors around the globe working on their brand….

Screen from ChromaQA, Color Quality QC software, showing ink Delta E, as well as recommended adjustments to improve Delta E. For printers, being able to see if the print is good during makeready and production is important. Most press consoles do not have any easy way to see if a print is measuring to the print standard. Press consoles typically show metrics such as dot gain, density and even solid ink LAB values but they…